Page 1
CD RECEIVER KD-AR880/KD-G830 RECEPTOR CON CD KD-AR880/KD-G830 RÉCEPTEUR CD KD-AR880/KD-G830 For canceling the display demonstration, see page 6. Para cancelar la demostración en pantalla, consulte la página 6. Pour annuler la démonstration des affichages, référez-vous à la page 6. For installation and connections, refer to the separate manual.
Page 2
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
Page 3
How to reset your unit How to use the M MODE and SEL buttons If you use M MODE or SEL (select), the display and some controls (such as the number buttons, ¢ ∞ buttons, buttons, and the control dial) enter the corresponding control mode. Ex.: When you press number button 1 after pressing M MODE, to operate the FM tuner.
Page 4
The control panel and button illustrations used for KD-AR880 is equipped with the steering wheel explanation in this manual is KD-G830. remote control function.
CONTENTS INTRODUCTIONS Preparation ....................... OPERATIONS Basic operations ....................• Using the control panel ................. • Using the remote controller (RM-RK50) ............Listening to the radio ..................Disc operations ....................11 Listening to the USB device .................. 13 EXTERNAL DEVICES Using the Bluetooth devices ................
Preparation Cancel the display demonstration and set the clock • See also pages 31 and 32. When the power is turned off: Check the current clock time When the power is turned on: Change the display information and pattern Turn on the power. Ÿ...
You cannot select these sources if they are not • Bluetooth Phone: Select preset phone ready or not connected. number. Only for KD-AR880. • TUNER/SIRIUS/XM: Search for station/channel. Select the bands. • CD/USB/CD-CH: Select track. • Turn on the power.
– Changes the categories. • Do not leave the remote controller in a place • While listening to an Apple iPod or a JVC (such as dashboards) exposed to direct sunlight D. player: for a long time. ∞...
• While listening to an iPod or a D. player (in menu For Bluetooth cellular phone: – Answers calls if pressed briefly. selecting mode): – Selects an item if pressed briefly. (Then, press – Rejects calls if pressed and held. ∞...
Page 10
When an FM stereo broadcast is hard Manual presetting to receive Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. Using the number buttons Reception improves, but stereo effect will be lost. • lights up on the display. Exit from the setting.
Listening to the preset station on the Select the preset number you want to store into. Preset Station List Display the Preset Station List, then select the preset station you want to listen to. • You can move to the lists of the other FM bands by pressing number button 5 ( ) or Change to the selected station.
Page 12
Pressing (or holding) the following buttons allows you to... Button MP3/WMA/AAC file Audio CD/CD Text Press: Select track Press: Select track Hold: Reverse/fast-forward track Hold: Reverse/fast-forward track Select folder — Locate particular folder directly * Locate particular track directly (Number buttons) * Holding either one of the buttons can display the Folder List (see page 13).
Selecting a folder/track on the list Select an item. (only for MP3/WMA/AAC disc) • When appears on the display, you can move back to the previous display by pressing number EX.: When “File” is selected in button 3. step 3 •...
If a USB device has been attached... Using the Bluetooth ® Playback starts from where it has been stopped previously. devices • If a different USB device is currently attached, playback For Bluetooth operations, it is required to connect the starts from the beginning.
Page 15
• When appears on the display, you can move Select a number. back to the previous display by pressing number button 3. Registering using “Open” Preparation Repeat steps until you finish entering a PIN code. Operate the device to turn on its Bluetooth function. Confirm the entry.
Page 16
Enter the specific PIN code of the device to Select “Connect” or “Disconnect” to connect/ the unit. disconnect the selected device. • Refer to the instructions supplied with the device to check the PIN code. Use the Bluetooth device to connect. Now connection is established and you can use the device through the unit.
Using the Bluetooth cellular phone Select “Bluetooth Phone.” Ÿ Enter Bluetooth menu. Make a call or setting using the Bluetooth setting menu. (See pages 18 and 36.) When a call comes in..When a text message comes in..The source is automatically changed to “Bluetooth If the cellular phone is compatible with text message Phone.”...
Page 18
Making a call * Displays only when your cellular phone is equipped with these functions. You can make a call using one of the Dial Menu items. • When appears on the display, you can move – If not displayed, please try to transfer the phone book memory of the cellular phone back to the previous display by pressing number button 3.
If playback did not start automatically, operate the Bluetooth audio player to start playback. • Refer also to page 16 for connecting/disconnecting/deleting a registered device. * Operation may be different according to the connected phone. Bluetooth Information: If you wish to receive more information about Bluetooth, visit our JVC web site. EXTERNAL DEVICES...
Change the display information and pattern It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. See also page 42.