Kenwood R-K731 Instruction Manual page 65

RP.XX
Related
RP.XX
Information
9 9
Select "Play" or "AI Play".
Press the [A] or [B] key.
Press the [ENTER] key.
10 10
Set the volume.
Press the [A] or [B] key.
You cannot use the [VOLUME] key to set the volume.
11 11
Select the input source.
Press the [A] or [B] key.
The mode changes as shown below each time you press the key.
TUNER CD
AUX D-IN2
Press the [ENTER] key.
If you select an input source other than "TUNER", this completes the set-
tings and "Complete" is displayed briefl y, after which the original display
reappears.
If you select "TUNER", use the [A] or [B] to select a preset number and
then press the [ENTER] key. This completes the settings and "Complete"
is displayed briefl y, after which the original display reappears.
Setting the Timer Setting the Timer
Playback is at the vol-
ume set in step 10.
Playback begins at the
specified time and the
volume gradually in-
creases to the level set
in step 10.
Press the [ENTER]
key.
USB
D-IN1
Continued to next page
65
English English