Kenwood R-K731 Instruction Manual page 21

Turn the system on (off ).
1 1
Insert a disc (when listening to a CD).
2 2
To use other components for playback, proceed to step 3.
Insert a CD with the label
side upwards.
Start playback.
3 3
Press the Play/Pause key for the input source. See <Procedures by Input Source> (P.25-50) for details.
You can select the sound quality you want. See <Audio Settings> (P.51-58) for details.
P r e s s i n g t h e [ T U N E R / B A N D ] , [ C D E ] ,
[USBE], [D.AUDIOE], [PC IN], [AUX] or
[D-IN1/2] key on the remote control also turns on
the power.
Pressing the power [K] key when the system is on
turns it off (Standby mode).
If you connect the external components to the [PC IN], [D-IN1] or
[D-IN2] terminal, playback operation should be started on each
component.
Basic Operation
21
English