The Control Panel; How To Set The Delayed Start - Zanussi ZSF 2440 Instruction Booklet

The control panel

On/Off button
Combination buttons "A":
In addition to selecting a programme, you can by
pressing these two buttons adjust the setting of the
water softener and cancel a programme in progress.
Indicator lamps:
Shows current phase of the selected programme.
• Wash cycle in progress
• Drying in progress
• Programme cycle
ended
The display can show:
• Which hardness level the water softener is
adjusted to.
• Which start time is set.
• Remaining time of a programme in progress.
• An error code.

How to set the delayed start

The programme start can be delayed between 1 and 19
hours.
1. Press in the On/Off button.
2. Press the delay start button repeatedly, until the
required delay shows on the display. Indicator
lamp for the delay start button is lit.
3. Press the button for the required programme.
4. The remaining time to the start is shown in the
display. After the set delayed start time has
elapsed, the programme starts.
Water softener
button
Control lamps:
Shows that
top lamp
middle lamp
lowest lamp
- 6 -
A
Programme
buttons
• Refilling of salt container is necessary
• Refilling of the rinse aid dispenser
is necessary
Changing the delayed start:
If the programme has not started, you are still able
to change the set time with the delay start button.
Cancelling the delayed start:
If the programme has not started, the delayed start
can be cancelled. Press the delay start button
repeatedly, until the running time of the selected
programme appears on the display. The required
programme starts immediately.
Indicator and
control lamps
Display
Delay start
button