Eeprom Memory - Thrustmaster FERRARI MOTORS User Manual

EEPROM MEMORY

Your gamepad features an internal chip which serves to retain all of your "MANUAL PRESET"
programming in memory (even when the gamepad is switched off or disconnected for a long period of
time).
You can save 1 different "MANUAL PRESET" for each system used (PS3, PC 4 Axes, PC 5 Axes or
PC 7 Axes). The exception is for "PS3" and "PC 4 Axes", which use the same "MANUAL PRESET"
(modifying or erasing one of these will have the same effect on the other).
TO ERASE A "MANUAL PRESET"
Steps
1 Enable your "MANUAL PRESET" (8)
Press and hold the MAPPING button (7)
2
Your "MANUAL PRESET" has now been erased (and is identical to the "Automatic Preset")
TO RETURN TO "FACTORY SETTINGS"
You can erase all of your programming and settings with a single step:
Steps
Press the MAPPING + SELECT + START buttons
1
All of your "MANUAL PRESETS" (= PC + PS3) or settings have now been erased
Note: On PC, we recommend that you do not carry out this step while in a game.
POSSIBLE USES IN GAMES
The optical wheel (thanks to its technology and degree of rotation greater than that of any mini-stick) offers
unparalleled precision and stability in all types of games: racing (ultra-precise steering), flying (rudder),
action and FPS (progressive zoom), sports (measured shot, strength of hit), etc.
The triggers (thanks to their progressive action and range of mechanical travel greater than that of any
button) offer extremely precise control in all types of games: racing (progressive and independent
acceleration and braking, handbrake), action and FPS (rate of fire, lateral movement), sports (measured
pass or shot, strength of hit or jump, running speed), etc.
SOME EXAMPLES AND TIPS:
- There are numerous configuration possibilities, depending on the game you are playing.
- On PC, if a game does not accept your programming (undesired effects) in "5 or 7 axes" mode, switch
your gamepad to "4 axes" mode (the standard mode).
- In certain (racing style) games, don't hesitate to test out the 2 sensitivity modes for the optical wheel
(Normal or High) in order to optimize its precision and responsiveness.
Action
for 2 seconds
Action
simultaneously
7/10
Color of PRESET
button
Lit up Green
Flashes Green
2 seconds
Color of PRESET button
Flashes Green and Red
2 seconds