Programming Procedure; Eeprom Memory - Thrustmaster T Flight Stick X User Manual

PROGRAMMING PROCEDURE

Steps
1
2 Press and release the MAPPING button.
3
Press and release the button or direction to program.
Press and release the button or direction onto which you
4
Your "MANUAL PRESET" is now enabled and up to date

EEPROM MEMORY

• Your joystick features an internal chip which saves all of your "MANUAL PRESET"
programming in memory (even when the joystick is switched off or unplugged for a long
period of time).
• You can save a different "MANUAL PRESET" for each platform used (one for PC and one
for PlayStation®3).
ERASING A "MANUAL PRESET"
Steps
1 Enable your MANUAL PRESET (8).
Press and hold the MAPPING button
2
(and once again identical to the "AUTOMATIC PRESET").
RETURNING TO "FACTORY SETTINGS"
You can erase all of your programming or settings carried out on both PC and PlayStation®3
with a single step:
Step
Simultaneously press the buttons
1
MAPPING + 11 (SE) + 12 (ST)
All of your "MANUAL PRESETS" (PC + PS3) or settings are now blank.
Note: This operation will completely restart your joystick
(on PC, we therefore recommend that you do this outside of games).
Action
Enable MANUAL PRESET (8)
by pressing the button.
wish to place your function.
(with your programming carried out).
Action
for 2 seconds.
Your "MANUAL PRESET" is now blank
Action
8/12
LED
GREEN
OFF
FLASHES GREEN
GREEN
LED
GREEN
FLASHES GREEN
2 SECONDS
LED
FLASHES GREEN/RED
2 SECONDS