Fitting A Plinth Facing - Miele T 4859 Ci Operating Instructions Manual

Installation and connection

Fitting a plinth facing

The gap between the lower edge of the
tumble dryer plinth and the floor can be
closed up using a suitable kitchen
furniture plinth facing.
The tumble dryer plinth has a special
groove in which a plinth facing can be
fitted.
Plinth facing dimensions
Length: 592 - 596 mm
Thickness: 8 mm
Height (H): The plinth facing height
must be calculated after aligning the
height of the appliance with the screw
feet or after fitting the raising kit(s).
Installation
Calculate height (H) from the floor up
into the groove (on the underside of
the tumble dryer).
Cut the plinth facing to size.
Slide it into the groove.
60
Useful tip:
If the dryer is fitted on a raising kit, you
can use double-sided adhesive tape on
the back of the plinth facing to secure it
to the raising kit.