Selector Sensors - Miele T 4859 Ci Operating Instructions Manual

Selector sensors

Selecting an option
Scrolling through the menus
Changing a value in the display
The selector sensors are on the left and right of the display.
They light up when they are active. The selector sensors are
used for the following:
A dot ( ) next to an option indicates that it can be selected.
The selector sensor on the left is active when the dot ( ) is in
front of the word, the selector sensor on the right is active
when the dot ( ) is behind the word or symbol.
If the menu lists more options than are visible in the display, a
scroll bar will appear on the right to show the position in the
list:
Main menu
\
Favourite programmes
\
Cottons
\
Minimum iron
The sensors on the right can be used to scroll up or down the
list. Each touch of the sensor will move the list up or down
one line.
A dotted line will appear under the last option in the list.
Time
+ -
Use the and sensors on the right to alter the value
highlighted. Once altered confirm the value with the l
sensor at the bottom right hand side.
Operating the tumble dryer
10:21 [
m
[
[
+
[
–
[
OK
OK
15