Calling Up The Data Stored In Memory - Citizen REF CH-650 Instruction Manual

MEASURING YOUR BLOOD PRESSURE
5
Finishing measurement.
• Press the "START/STOP" switch to turn the monitor off.
AUTOMATIC POWER OFF FEATURE
• After taking the blood pressure measurement, pressing the "START/
STOP" switch will turn the monitor off. However, if you do not press
the switch, the monitor's Auto OFF function will automatically turn
the monitor off after 3 minutes.

CALLING UP THE DATA STORED IN MEMORY

60 measurement results can be stored in the memory.
The average value is calculated automatically to help you manage your
daily health.
HOW TO CALL UP THE DATA
1
Press the "MEMORY" switch.
• "3A" indicating the average value appears on the left section
of the display. Then, the average value, based on the last three
measurements, is displayed. ("3A" and the average value do not
appear if there are two or fewer measurements stored in memory.)
- Eng 20 -
CALLING UP THE DATA STORED IN MEMORY
2
Each time you press the switch, the measurement data are
displayed in order from the most recent to the oldest.
The measurement results are displayed after the data number.
• The value stored in memory is numbered in the order of
measurements. For example, when 60 sets of data are stored in
memory, the data number 1 represents the latest data.
Data number: 1, 2, 3, ... ... 59, 60
The latest data
HOW TO DELETE THE DATA
1
Press the "MEMORY" switch.
2
While pressing the "MEMORY" switch, press and hold the
"START/STOP" switch for more than 3 seconds.
All the stored data will be deleted.
Press and
hold for 3
seconds
Deleted
- Eng 21 -
The data number
is displayed before
the measurement
results.
The earliest data
A message
saying all the
data have been
deleted from
the memory is
displayed.