Measuring Your Blood Pressure; Calling Up The Data Stored In Memory - Citizen CH-650 Instruction Manual

CH-650̲2L.indd 20 CH-650̲2L.indd 20
All manuals and user guides at all-guides.com

MEASURING YOUR BLOOD PRESSURE

5
Finishing measurement.
• Press the "START/STOP" switch to turn the monitor off.
AUTOMATIC POWER OFF FEATURE
• After taking the blood pressure measurement, pressing the "START/
STOP" switch will turn the monitor off. However, if you do not press
the switch, the monitor's Auto OFF function will automatically turn
the monitor off after 3 minutes.

CALLING UP THE DATA STORED IN MEMORY

60 measurement results can be stored in the memory.
The average value is calculated automatically to help you manage your
daily health.
HOW TO CALL UP THE DATA
1
Press the "MEMORY" switch.
• "3A" indicating the average value appears on the left section
of the display. Then, the average value, based on the last three
measurements, is displayed. ("3A" and the average value do not
appear if there are two or fewer measurements stored in memory.)
- Eng 20 -
2012/11/22 14:43:21 2012/11/22 14:43:21