Loading The Batteries; Removing The Batteries - Citizen REF CH-650 Instruction Manual

LOADING THE BATTERIES

(Batteries supplied with the unit should be loaded in compartment
before you use the blood pressure monitor.)
1
Open the cover of battery compartment.
Battery cover
2
Place batteries in the compartment.
Put the batteries paying attention to the positive and negative
terminal symbols and .
* The battery goes in negative side
Insert the battery near
the display fi rst.
- Eng 12 -
Pressing down on the
battery cover, slide the
cover off in the direction of
the arrow.
fi rst.
3
Close the battery cover.
Slide the cover in the direction
of the arrow. Push the cover on
until it clicks.

REMOVING THE BATTERIES

• When the icon is displayed or nothing appears in the display,
replace the old batteries with two new ones. All two batteries should
be changed at once.
• Use only alkaline batteries.
• Do not use rechargeable batteries.
• Do not use alkaline (LR03) and manganese (R03) batteries together.
• Batteries included are for demonstration purposes only. Battery life
may be shorter than specifi ed.
• When disposing of used batteries, comply with governmental
regulations or environmental public institution's rules that apply in
your country/area.
- Eng 13 -
LOADING THE BATTERIES