Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZXL 626 IT
Summary of Contents for Zanussi ZXL 626 IT
- Page 1 BUILT-IN HOB ZXL 626 IT INSTRUCTION BOOKLET...
-
Page 2: Important Safety Information
Important Safety Information These warnings are provided in the interest of safety. You read them carefully before MUST installing or using the appliance. About Installation, Cleaning • Ensure that all control knobs are in the OFF position when not in use. and Manteinance •... -
Page 3: Table Of Contents
Possibilities for insertion This appliance complies with the following E.E.C. Directives: 73/23 - 90/683 (Low Voltage Directive); 89/336 (Electromagnetical Compatibility Directive); MANUFACTURER: ELECTROLUX ZANUSSI S.p.A. 93/68 (General Directives) Viale Bologna, 298 and subsequent modifications. 47100 FORLÌ (Italy) 90/396 (Gas Appliances Directive ) -
Page 4: Using The Hob Correctly
Using the hob correctly To ensure maximum burner efficiency, it is strongly Burner minimum maximum recommended that you use only pots and pans with a diameter diameter bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (fig. 2 -a). Medium (semirapid) 120 mm. -
Page 5: Cleaning And Maintenance
Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. General cleaning Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. -
Page 6: Technical Data
Technical Data Gas Burners Rating Auxiliary Burner 1 kW Semirapid Burner 2 kW Appliance Class Category II 2H3B/P Setting LPG G30/G31 28-30/37 mbar Gas connection G 1/2" Electric hotplates Small hotplate Ø 145 mm. 1000 W Large hotplate Ø 180 mm. 2000 W Electric Supply 230 V 50 Hz... -
Page 7: Gas Connection
Gas connection Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If using flexible metallic pipes, be careful they do not come in contact with mobile parts or they are not squeezed. -
Page 8: Electrical Connection
Electrical Connection The following instructions about installation RIGID COPPER PIPE OR must be carried out by qualified personnel in FLEXIBLE PIPE IN STAINLESS compliance with the regulation in force. STEEL The appliance is designed to be connected to 230 V monophase electricity supply. -
Page 9: Adaptation To Different Types Of Gas
Adaptation to different types of gas Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2). •... -
Page 10: Building In
Building In These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in the relevant diagram. The edge of the cut out must have a minimum distance from the rear wall of 55 mm. -
Page 11: Possibilities For Insertion
Possibilities for insertion Kitchen unit with door Kitchen unit with oven Proper arrangements must be taken in designing the The hob recess dimensions must comply the indication furniture unit, in order to avoid any contact with the given in Figs. 13 and 14 and must be provided with bottom of the hob which can be heated when it is brackets to allow a continuous supply of air. - Page 12 The Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.