Important Safety Information These warnings are provided in the interest of safety. You read them carefully before MUST installing or using the appliance. About Installation, Cleaning cooking appliance, ensure that electric cables are not in contact with it and keep them far enough from the and Maintenance heated parts of this appliance.
E.E.C. Directives: MANUFACTURER: 2006/95 (Low Voltage Directive); ELECTROLUX ITALIA S.p.A. 2004/108 (Electromagnetical Compatibility Directive); C.so Lino Zanussi 30 90/396 (Gas Appliances Directive ) 33080 Porcia (PN) - ITALIA and subsequent modifications. Instruction for the User Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory.
Using the hob correctly To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (fig. 2 -a). It is also advisable, as soon as a liquid starts boiling, to Burner minimum...
Before the First Use of the Appliance Before using the appliance remove all packaging, including the advertising labels and any protective film. When using the hob for the first time: 1) place on all the plates a pan filled with some water; 2) switch the plates on for about 10 minutes at “maximum”...
Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. General cleaning Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food.
Technical Data Gas Burners Rating Auxiliary Burner 1 kW Semirapid Burner 2 kW Appliance Class Category II 2H3B/P Setting LPG G30/G31 30/37 mbar Gas connection G 1/2" Electric hotplates Small hotplate Ø 145 mm. 1000 W Large hotplate Ø 180 mm. 2000 W Electric Supply 230 V...
Gas connection Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If using flexible metallic pipes, be careful they do not come in contact with mobile parts or they are not squeezed.
Electrical Connection The following instructions about installation RIGID COPPER PIPE OR must be carried out by qualified personnel in FLEXIBLE PIPE IN STAINLESS compliance with the regulation in force. STEEL The appliance is designed to be connected to 230 V monophase electricity supply.
Adaptation to different types of gas Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2). •...
Building In These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in the relevant diagram. The edge of the cut out must have a minimum distance from the rear wall of 55 mm.
Possibilities for insertion Kitchen unit with door Kitchen unit with oven Proper arrangements must be taken in designing the The hob recess dimensions must comply the indication furniture unit, in order to avoid any contact with the given in Figs. 13 and 14 and must be provided with bottom of the hob which can be heated when it is brackets to allow a continuous supply of air.
European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications:- ·...