HANG SUPPORT ASSEMBLY ON
REAR DRAWBAR (See Fig. 1)
1. Slide ﬂ anges of support assembly into drawbar slots
ﬁ rst, then, pivot backwards inserting pin into drawbar
2. Be sure support assembly is seated properly, then
secure with retainer spring.
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY (See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
1. Position cover assembly on ground behind tractor.
2. Lift and rotate cover to align cover brackets with support
3. Slide cover assembly down onto the support tubes.