Assembly - Husqvarna EZ4820/968999293 Operator And Parts Manual

1
BAGGER SUPPORT ASSEMBLY
(See Figures 1)
1. Remove the eight (8) 5/16 carriage bolts and
nuts that secure the rear guard straps to the
mower frame. Discard bolts but save the
nuts.
2. Place catcher mount in place and install eight
(8) 990209, 5/16 x 1 bolts. Secure with the
eight (8) 5/16 nyloc nuts previously removed.
REAR ENGINE GUARD
HITCH
BOLT, 5/16-18 X 1, GR5
FIGURE 1

ASSEMBLY

2
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY
(See Figure 2)
NOTE: For ease of assembly, you may wish to
obtain the assistance of another person for
mounting cover assembly to mower.
1. Position cover assembly on ground behind
mower as shown.
2. Lift and rotate cover to align cover brackets
with support assembly tubes.
3. Slide cover assembly down onto the support
tubes.
COVER
ASSEMBLY
PREVIOUSLY
REMOVED NUT
SUPPORT
ASSEMBLY
FIGURE 2
7