Download Print this page

Assembly - Husqvarna 96071000100 Owner's Manual

38 inch mower grass catcher
Hide thumbs Also See for 96071000100:

Advertisement

1
BAGGER SUPPORT ASSEMBLY
(See Fig. 1A)
1. Your tractor already has four (4) shoulder bolts installed
on the rear drawbar, simply hang the support assembly
on the bolts.
SUPPORT

ASSEMBLY

TO REMOVE THE SUPPORT ASSEMBLY (See
Fig. 2)
1. Pull outward on the stop bracket enough to allow support
assembly to be lifted up and away from drawbar.
PULL OUT ON STOP BRACKET TO
REMOVE SUPPORT ASSEMBLY
ASSEMBLY
SHOULDER
BOLTS
FIG. 1A
02643
FIG. 1B
2
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY (See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
as sis tance of another person for mounting cover assembly
to tractor.
1. Position cover assembly on ground behind tractor as
shown.
2. Lift and rotate cover to align cover bracket with support
assembly.
3. Slide cover assembly down onto the support
assembly.
COVER
ASSEMBLY
02646
5
SUPPORT
ASSEMBLY
FIG. 2

Advertisement

loading

This manual is also suitable for:

Qct97