Table of Contents
Advertisement
" Installing speakers
1
Fix the pattern paper and drive two screws into the wall with a dis-
tance of 160 mm (6-5/16") in between. When mounting vertically,
set the distance to 110 mm (4-5/16").
(Horizontal position)
5 / 1 6 "
)
m ( 6 -
1 6 0 m
Pattern paper
for speaker
2
Tighten the screws and remove the paper. Hook the speaker on the
screw heads and make sure it is secure.
(Horizontal position)
Speaker
wire
Wall surface
Put the speaker wire in the groove on the back of the speaker.
Notes:
! Place speakers with the tweeter on the outside. Left and right speakers should
(Horizontal position)
Tweeter
(Vertical position)
)
5 / 1 6 "
m ( 4 -
1 1 0 m
! There are four VESA (*) screw holes on the back of the main unit and speakers.
! Be sure to install the product according to the method recommended by the
Pattern paper
for speaker
(Main unit)
(Vertical position)
(*) VESA (Video Electronics Standards Association) is an organization to promote
the standardization of digital imaging device for PCs.
Speaker
wire
Wall surface
always be positioned symmetrically.
(Vertical position)
Tweeter
Tweeter
You can also use commercially available fittings for mounting.
bracket manufacturer.
03/6/9
SD-EX220H(H)_E.fm
SD-EX220H
ENGLISH
Tweeter
(Speaker)
E-10
TINSZ0953AWZZ
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
