Advanced Cd Playback; Radio - Sharp SD-EX220H Operation Manual

1-bit digital audio system
Hide thumbs Also See for SD-EX220H:
Table of Contents

Advertisement

! To remove the CD
1 Whilst in the stop mode, press the
button.
2 Press the CD eject button and remove the CD.
3 Press the
button to close the CD cover.
Push
CD Eject Button
Caution:
" Do not open or close the CD cover manually. It may cause malfunctions to
the unit.
" Be careful not to jam your fingers in the CD cover.
" Do not play discs with special shapes (heart- or octagon-shaped). It may cause
malfunctions.
" If the power fails whilst the CD cover is open, wait until the power is restored.
" Keep foreign objects out of the CD compartment.
" When the unit is not being used, be sure to close the CD cover. If it is left open, the
lens may be covered with dust and the unit may not operate properly.
" When the unit enters the stand-by mode, the opened CD cover will close automat-
ically.
Notes:
" Subjecting the unit to shock or vibration may cause mistracking or skipping.
" Playing certain CD at a high volume may cause mistracking. In this case, lis-
ten at a lower volume.
" If the recorded side of the CD is touched or becomes dirty, refer to "Care of com-
pact discs" (page 29) and clean it.
" If a disc is damaged or dirty, the sound may skip.
" If an error message is displayed during CD operation, see "Error messages" on
page 29.
" If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.

Advanced CD Playback

! To locate the beginning of a track
To move to the beginning of the next track:
Press the
button during playback.
" You can skip to any track by pressing the
track number appears.
To restart the track being played:
Press the
button during playback.
" You can skip to any track by pressing the
track number appears.
! To locate the desired portion
For audible fast forward:
Press and hold down the
button during playback.
For audible fast reverse:
Press and hold down the
button during playback.
Notes:
" Normal playback will resume when the
" When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
To search very quickly:
When fast forward or fast reverse is used whilst in the pause mode, the playback
point will move more quickly than when using audible fast forward or audible fast
reverse playback.
" In this mode, no sound is heard. Therefore, you should refer to the time display.
" When you lift your finger, the unit will re-enter the pause mode.
03/6/9
SD-EX220H(H)_E.fm
SD-EX220H
ENGLISH
button repeatedly until the desired
button repeatedly until the desired
or
button is released.
E-14
TINSZ0953AWZZ
1
2
3
4
5
6
7
8

Advertisement

Table of Contents
loading

Table of Contents