System Connections - Sharp SD-EX220H Operation Manual

1-bit digital audio system
Hide thumbs Also See for SD-EX220H:
Table of Contents

Advertisement

System connections

SD-EX220H
ENGLISH
FM aerial
Right
speaker
How to open side covers
Open the right and left side covers to connect the system.
E-7
" Speaker connection
! Make sure to unplug the AC lead before connecting the speaker leads.
AM loop aerial
! Connect the speaker wires to the speakers first, then to the unit.
Connect the wire with the grey line to the minus (-) terminal and the white wire
to the plus (+) terminal.
Left
Right speaker
speaker
Grey line
Caution:
! Use speakers with an impedance of 4 ohms or more, as lower impedance speak-
! Do not mistake the
! Do not let the bare speaker wires touch
! Do not allow any objects to fall into or to be
! Do not stand or sit on the speakers. You may
! Do not short-circuit the speaker wires. If the
Note:
Place speakers with the tweeter on the out-
side (see diagram).
03/6/9
This prevents short circuit between
and
White
3
1
2
ers can damage the unit.
and , and right and left terminals of the speaker leads. (The
right speaker is placed on the right when you face the unit.)
each other.
placed in the bass reflex ducts.
be injured.
power is turned on, malfunction may occur.
Tweeter
SD-EX220H(H)_E.fm
terminals.
Left speaker
Grey line
White
White
Grey line
Incorrect
Incorrect
Tweeter
TINSZ0953AWZZ

Advertisement

Table of Contents
loading

Table of Contents