Sharp SD-EX220H Operation Manual page 27

1-bit digital audio system
Hide thumbs Also See for SD-EX220H:
Table of Contents

Advertisement

! To recall stations in memory
To specify programmed types and
select stations (PTY search):
You can search a station by specifying the
programme type (news, sports, traffic pro-
gramme, etc. ... see page 20) from the sta-
tions in memory.
1
Press the TUNER (BAND) button to select the FM band.
2
Press the RDS PTY-TI button.
"PTY TI" and "SELECT" will appear alternately for about 6 seconds.
3
Within 6 seconds, press the TUNER PRESET ( or ) button to se-
lect the programme type you want.
Each time the button is pressed, the programme type will appear. If the button is
held down for more than 0.5 seconds, the programme type will appear continu-
ously.
4
Whilst the selected programme type is flashing (within 4 seconds),
press the ENTER button again.
After the selected programme type has been lit for 2 seconds, "SEARCH" will ap-
pear, and the search operation will start.
Notes:
" If the display has stopped flashing, start again from step 2. If the unit finds out a
desired programme type, the corresponding station name will flash for 10 seconds
and remain lit.
" If you want to listen to the same programme type of another station, press the
RDS PTY-TI button whilst the channel number or station name is flashing. The
unit will look for the next station.
" If no station can be found, "NOTFOUND" will appear for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 4, "TP" will appear. (This does not
mean that you can listen to the traffic information at that time.)
When traffic information is broadcast, "TA" will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2, etc.) from the
stations stored in memory.
Before starting this operation, you must store one or more station names in memory.
1 Press the TUNER (BAND) button to select the FM band.
2 Press the TUNER PRESET (
or
) button to select the desired station.
3 The station name will be displayed for 3 seconds. Then the display will change as
follows.
03/6/9
SD-EX220H(H)_E.fm
SD-EX220H
ENGLISH
1
2
3
4
5
6
7
8
E-22
TINSZ0953AWZZ

Advertisement

Table of Contents
loading

Table of Contents