Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
1) Remove all packing materials from the inside of the
oven cavity. Remove all the blue protective film
from the outside of the oven.
2) Check the oven carefully for any sings of damage.
3) Place the oven on a flat, level surface strong enough
to support the oven's weight plus the heaviest item
likely to be cooked.
4) Ensure there is a minimum free space above the
oven of 15 cm.
5) Securely connect the plug of the oven to a standard
earthed (grounded) household electrical outlet.
ACCESSORIES
Check to make sure the following accessories are provided:
• Operation manual
NOTE:
• When you order accessories, please mention the two items: part name and model name to your dealer or
SHARP authorized service agent.
• The model name is printed on the cover of this operation manual.
BEFORE OPERATION
Plug in the oven.
1. The oven display will flash:
2. Touch the STOP button the display will show:
STOP
x1
6) The unit may be secured to a countertop or stand.
There is a screw hole in the bottom of the unit. After
the oven is permanently placed, drill a hole through
the counter top for a 5 mm self-tapping screw. The
hole should be 20 mm from the left side of the outer
case cabinet and 180 mm back from the front edge
of the cavity face plate.
15 cm
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
3
180 mm
20 mm
Hole
Advertisement
Table of Contents
