Steering Friction Adjusting Screw - Yamaha F9.9C Ower's Manual

2-9
EMU11550
Throttle Friction Adjusting Screw
A friction device in the remote control box
provides adjustable resistance to movement
of the remote control lever, and can be set
according to operator preference. An adjust-
ing screw is located on the front of the
remote control box.
701035
Resistance
Increase
Decrease
w
Do not overtighten the friction adjusting
screw. If there is too much resistance, it
may be difficult to move the lever, which
could result in an accident.
EMU01080
STEERING FRICTION ADJUSTING
SCREW (for Tiller control model)
A friction device provides resistance to
steering movement. This is adjustable for
operator
screw/bolt is located on the swivel bracket.
EMU12960
408014
Adjustment
Resistance
Increased
Decreased
w
Do not
screw/bolt. If there is too much resis-
tance, it may be difficult to steer, which
could result in an accident.
Screw
Turn clockwise
Turn counterclockwise
preference. An
Screw/Bolt
Turn clockwise
Turn counterclockwise
over tighten the
E
adjusting
friction