Yamaha F9.9C Ower's Manual page 73

6) Remove the motor from the water tank.
7) Install the top cowling.
q
1 Water surface
2 Lowest water level
w
605016
EMU03420
8 Flushing with the Flushing Attachment
cC
Avoid running the outboard at high
speed while on the flushing attachment,
or overheating could occur.
q
1) Remove the top cowling and the pro-
000353
2) Install a flushing attachment 1 to the
3) Run the engine at a fast idle for 10~15
4) Just prior to turning off the engine,
5) Remove the flushing attachment and
6) Install the top cowling and the propeller.
NOTE:
A flushing attachment is available from a
Yamaha dealer.
peller.
cooling water inlet.
minutes supplying fresh water.
quickly spray "Yamaha
Engine Fogging Oil" (Part No. LUB-
STRRT-12-00) alternately
silencer cover. When properly done, the
engine will smoke excessively and
almost stall.
wipe off any excess water.
E
Stor-Rite
into the
4-6