Olivetti D-COLOR MF2604en Operation Manual page 137

If user management or account management is
enabled, the login screen will appear. For the login
procedure, refer to Account Management on
page 4-51.
2
Press the or
3
Press the OK key.
4
Press the or
[Reception], [TX/RX Restrict.] or [TX/RX Common].
Configuring settings from [Transmission]
• Retry Times (page 6-13)
Configuring settings from [Reception]
• Media Type for Print Output (page 6-14)
• Rings (page 6-16)
• Receiving Mode (page 6-17)
• Reception Date/Time (page 6-18)
• 2 in 1 Reception (page 6-19)
• Print all at once [Batch Print] (page 6-20)
• Procedure for receiving an encrypted
transmission (page 6-25)
• Duplex Print Output (page 6-27)
Configuring settings from [TX/RX Restrict.]
• Transmission Restriction (page 6-28)
- Registering, changing, and deleting Permit fax
numbers (page 6-29, page 6-30)
- Registering, changing, and deleting Reject fax
numbers (page 6-32, page 6-33)
- Transmission restriction settings (page 6-36)
- Reception restriction settings (page 6-37)
- Registering, changing, and deleting Permit ID
numbers (page 6-34, page 6-35)
- Checking and deleting the registered contents
of an encryption key (page 6-22, page 6-22)
- Unknown Number Reception (page 6-37)
Configuring settings from [TX/RX Common]
• Setting an encryption key for encrypted
transmission (page 6-22)
5
Press the OK key.
6
Move to the screen where you want to configure a
setting. (Follow the procedure in the explanation of
the setting.)
6-8
Setup and Registration
key to select [Fax].
key to select [Transmission],