Olivetti ECR 5920 F User Manual page 15

5. Set a Fixed VAT Rate
1. Control lock key position: PRG.
2. Type the [number] that represents the VAT (1 for VAT1,
2 for VAT2, 3 for VAT3 and 4 for VAT4).
3. Press .
4. Type the VAT rate. Five digits can be used and you MUST
enter three digits after the desired decimal place.
5. Press .
Example: Set a VAT1 rate of 5.50%.
Type/Press:
VAT number
5
NOTE: Before changing a VAT rate, print a Z Financial
report. See "X1 and Z1 Financial Reports".
See sections "Fraction Rounding for VAT Calculation" and
"Printing VAT Information on Receipt" for other VAT-related
features.
6. Program the Departments
A total of 60 departments are available. Programming a
department means defining a department status and an
associated price.
The department status consists of a 9-digit code that char-
acterizes the department as follows:
• positive or negative sales
• single or multiple item sales
• High Digit Lock Out (HDLO) status, whereby you prohibit
item entries for a certain number of digits and above.
• previously programmed tax status
• use of an alternative tax status (for example, take-out tax)
with respect to the one programmed, according to the item
sold.
• link to one of up to 10 merchandise categories.
You can then assign a preset price to the department.
The 9-digit department status can be programmed using the
following options (defaults in bold):
Positive/Negative Sales
0 = Positive department
1 = Negative department
HDLO
0 = No HDLO
1 = 0.01 - 0.09
2 = 0.01 - 0.99
3 = 0.01 - 9.99
4 = 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99
Alternative tax status
00 = Non taxable
01 = Taxable with VAT 1
02 = Taxable with VAT 2
03 = Taxable with VAT 3
04 = Taxable with VAT 4
50
Multiple/Single Item Sales
0 = Multiple item sales
1 = Single item sales
Tax Status
00 = Non taxable
01 = Taxable with VAT 1
02 = Taxable with VAT 2
03 = Taxable with VAT 3
04 = Taxable with VAT 4
Merchandise category
00 - 10 (category number)
1. Control lock key position: PRG.
2. Press to enter the department status programming
mode.
3. Define the department to program by typing the
department number [1 to 60] and then press
.
4. Type the [Positive/Negative sales code], [Single/
multiple item sales code], [HDLO code], [Tax Status
code], [Alternative tax status code] and [Category
link number] by referring to the previous table. A 9-digit
status code must be entered.
5. Press followed by
6. Press to enter the department price definition
mode.
7. Define the department to associate the price to by typing
the department number [1 to 60] and then press
8. Type a [unit price] to assign, press
to exit.
Example: Program Department 2 as follows: multiple
positive item sales, no HDLO, VAT 2, alternative VAT 3, link
to category 3 and an associated price of £2.50.
Type/Press:
Positive Multiple
Department
item sales item sales
Alternative Merchandise
Tax status category
Unit price
Department
After you have programmed your departments, you can print
a report that indicates the programming values. See section
"Department Programming Report" for details.
to exit.
.
followed by
Tax status
No HDLO
7