Smeg HOB Instructions For Use Manual page 11

Instructions for the user
6.2 Cleaning the components
6.2.1 Knobs
The knobs should be cleaned with lukewarm water and
washing up liquid. For easier cleaning they can be
removed by pulling them upwards. Dry thoroughly after
cleaning.
Do not use aggressive products containing alcohol or products for cleaning steel
and glass when cleaning the knobs, as these products could cause permanent
damage.
6.2.2 Pan stands
Remove the pan stands and clean them with lukewarm
water and non-abrasive detergent, making sure to
remove any encrustations. Replace them on the
cooking hob.
These components must not be washed in the
dishwasher.
6.2.3 Burner caps and flame-spreader crowns
The burner caps and flame-spreader crowns can be
removed for easier cleaning. Wash them in warm water
and non-abrasive detergent making sure to remove
any encrustation, then wait until they are perfectly dry.
Refit the burner caps on the appropriate crowns and
make sure that the flame-spreader crowns are
correctly positioned in their housings with their
respective burner caps.
6.2.4 Igniters and thermocouples
For correct operation the igniters and thermocouples
must always be perfectly clean. Check them frequently
and clean them with a damp cloth if necessary.
Remove any dry residues with a wooden toothpick or a
needle.
13