Table of Contents
Advertisement
Rear Panel
Rear panel Port and Button Definition
Port
Description
LAN (1-4)
Connect your LAN's PCs, printer servers, hubs and switches etc.
WAN
Connect your xDSL or Cable modem and is linked to the Internet.
This button has two (2) functions:
RESET
12V DC
DC Power in.
1.5 Getting Started
This is a step-by-step instruction on how to start using the router and get connected to the
Internet.
1) Setup your network as shown in the setup diagram below.
Off - Corresponding LAN (hub) port connection is using
10Base-T.
LNK / ACT
On - Corresponding LAN (hub) port is active.
Off - No active connection on the corresponding LAN (hub) port.
Flashing - Data is being transmitted or received via the
corresponding LAN (hub) port.
If problems occur with your router, press the router's reset button
with a pencil tip (for less than 3 seconds) and the router will re-boot
itself, keeping your original configurations.
If problems persist or you experience extreme problems or you
forgot your password, press the reset button for longer than 3
seconds and the router will reset itself to the factory default settings
(warning: your original configurations will be replaced with the
factory default settings)
8
Advertisement
Table of Contents
