Table of Contents
Advertisement
2.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your
ISP should provide all the information required in this section.
Parameter
PPTP Account
PPTP Password
Retype Password
Service IP Address
My IP Address
My Subnet Mask
Connection ID
MTU
Maximum Idle Time
Enter the PPTP Account provided by your ISP for the PPTP
connection.
Enter the Password provided by your ISP for the PPTP
connection.
Re-enter the Password for confirmation.
Specify PPTP Server IP address that you want to connect to.
This is the IP address that your ISP has given you to establish
a PPTP connection.
Enter the Subnet Mask provided by your ISP.
(e.g. 255.255.255.0)
This is the ID given by ISP. This is optional.
This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you do
not wish to set a maximum packet size. (The default setting is
1460)
You can specify an idle time threshold (seconds) for the WAN
port. This means if no packets have been sent (no one using
the Internet) during this specified period, the router will
automatically disconnect the connection with your ISP. (The
default settings is 300 seconds)
18
Description
Advertisement
Table of Contents
