Table of Contents
Advertisement
Parameter
Enable Client Filter
IP
Port
Type
Block Time
Day
Time
Comment
Enable
3.5.3 URL Filtering
You can block access to some Web sites from particular PCs by entering a full URL
Description
Select to enable "Client Filtering" function.
Enter the IP address range that you wish to apply this
rule.
You can assign the specific port ranges. The router
will block clients from accessing Internet services that
use these ports.
This allows you to select UDP, TCP or both protocols
that you want to block.
Select <Always> router will block the access forever.
Select <Block> router will block the access according
to the time schedule.
Select a certain days in the week to block the access.
Select a certain time in a day that you want to block.
The description of this setting.
To enable the rule of Client Filtering
47
Advertisement
Table of Contents
