Parameters
MAC Address Control
Configure MAC Address
3.6 Routing
This section allows you to configure XRT-401E's static route and check the current routing
table. The routing is only for internal routing using, so you do not need to disable NAT
function, and there are two ways to manage the device's routing information, it includes RIP
and Static.
3.6.1 Routing Table
The routing table display the current routing information in system.
Description
Check "Enabled" to enable MAC Filtering.
Select Filter out or only accept the following MAC
address connects to Internet.
Fill in or "MAC Address" and "Comment" of the PC, or
select the MAC Address from "Action", and then click
"Add".
49