Setting The Alarm Clock; Restoring The Handset To The Factory Settings; Setting The Base Station; Protecting Against Unauthorised Access - Siemens Gigaset C470 User Manual

Setting the base station

Setting the alarm clock

Precondition: The date and time have
already been set (page 9).
Activating/deactivating the alarm
clock and setting the wake-up time
¢
v ì
¤
Change multiple line input:
Activation:
Select or Off.
On
Time:
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1–6).
¤
Save changes: (page 49).
You will see the ì icon.
A wake-up call with selected ringer tone
(page 38) is signalled on the handset. The
wake-up call sounds for 60 seconds. ì is
shown in the display. If no key is pressed,
the wake-up call is repeated twice at five
minute intervals and then turned off.
During a call, the wake-up call is signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding.
Press the display key. The
§OFF§
wake-up call is deactivated.
Or
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
40
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, call-by-call
list, call history, SMS lists or the handset's
registration to the base station.
¢ ¢
v Ð
Handset
Press the display key.
§Yes§
a
Press and hold (idle status).
Setting the base station
The base station settings are carried out
using a registered Gigaset C47H handset.
Protecting against unauthorised
access
Protect the system settings of the base
station with a PIN known only to yourself.
The system PIN must be entered when, for
example, registering/deregistering a
handset to/from the base station or when
restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only by you.
¢ ¢ ¢
v Ð
Base
~
Enter the current system PIN
and press
~
Enter new system PIN. For
security reasons, the PIN is
shown as four stars ( **** ).
s ~
Jump to the next line, re-enter
new system PIN and press
a
Press and hold (idle status).
¢
Reset Handset
System PIN
.
§OK§
§OK§
.