Notes On The User Guide; Example Of A Menu Input; Example Of Multiple Line Input - Siemens Gigaset C470 User Manual

Notes on the user guide

General specifications
DECT standard is supported
GAP standard is supported
No. of channels 60 duplex channels
Radio frequency
range 1880–1900 MHz
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission 10 mW, average power per
power channel
Range up to 300 m outdoors,
up to 50 m indoors
Base station
power supply 230 V ~/50 Hz
Environmental +5 °C to +45 °C;
conditions in oper-
20% to 75% humidity
ation
Dialling mode DTMF (touch tone dial-
ling)/DP (dial pulsing)
Notes on the user guide
This section explains the meaning of cer-
tain typographical conventions that are
used in this user guide.

Example of a menu input

The steps you need to perform are shown
in abbreviated form in the user guide. This
is illustrated below using the example of
"Setting the contrast for the display". The
things you have to do are explained in the
boxes.
48
¢ ¢
v Ð
Display
¤
With the handset in idle status, press
on the right of the control key (v) to
open the main menu.
¤
Select the line
Settings
trol key q.
¤
Press v or press the display key
confirm the
Settings
The submenu is displayed.
Settings
¤
Press on the bottom of control key q
repeatedly until the
tion is selected.
¤
Press v or press the display key
confirm the selection.
Contrast Select and press
¤
Press on the bottom of control key q
repeatedly until the
function is selected.
¤
Press v or press the display key
confirm the selection.
r
Select contrast and press the
display key
¤
Press on the right or left of the control
key to set the contrast.
¤
Press the display key
the selection.
a
Press and hold (idle status).
¤
Press and hold the end call key until the
handset returns to idle status.

Example of multiple line input

In many situations you can change set-
tings or enter data in several lines of a dis-
play.
In this user guide icons are used to guide
you step by step through multiple line
input. This is illustrated below using the
example of "Setting the date and time".
using the con-
to
§OK§
function.
menu func-
Display
to
§OK§
.
§OK§
Contrast menu
to
§OK§
.
§Save§
to confirm
§Save§