Base Station Settings; Protecting Against Unauthorised Access; Restoring The Base Station To The Factory Settings - Siemens Gigaset C580 User Manual

Base station settings

The base station settings are carried out
using a registered Gigaset C58H handset.
Protecting against
unauthorised access
Protect the system settings of the base sta-
tion with a PIN known only to yourself. You
may have to enter the system PIN into the
base station when manually registering a
handset.
Changing the system PIN
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit PIN
known only to yourself.
¢ ¢
§Menu§
Settings
~
Enter the old system PIN and
§OK§
press
shown as four stars ( **** ).
~
Enter your new system PIN and
§OK§
press
a
Press and hold (idle status).
Resetting the system PIN
If you have forgotten the system PIN, you
can reset it to the original code 0000 by
resetting the base station to its default set-
tings. This will also reset every other set-
ting, see "Restoring the base station to the
¢
factory settings" page 35.
¢
Base System PIN
. For security, the PIN is
.
Restoring the base station to
the factory settings
When restoring factory settings:
u
Handsets are de-registered
– When resetting via the menu:
all Gigaset handsets
– When resetting using the key on the
base station: also all handsets of
other GAP capable devices
u
Individual settings are reset
u
All lists are deleted
u
The system PIN is reset to the original
code 0000
u
Only the date and time are retained.
Resetting the base station via the
menu
¢ ¢
§Menu§
Settings
§OK§
Press the display key to confirm.
Resetting the base station using a
key on the base station
¤
Disconnect the power cord from the base
station.
¤
Hold down the registration/paging key
¢
( page 1) on the base station while
reconnecting the power cable to the base
station. Release the key after approxi-
mately 5 seconds.
The base station has now been reset.
Base station settings
¢
Base Base Reset
35