Setting Pauses; Temporarily Switching To Tone Dialling (Dtmf) - Siemens Gigasrt C590 User Manual

Connecting the base to the PABX

Setting pauses

Changing the pause after line seizure
You can change the length of the pause
that is inserted between pressing the talk
key c and sending the number.
v
Open the main menu.
*#Q5# L
Press keys.
~
Enter digit for the pause
length (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.) and press
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5# 2
Press keys.
~
Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
Changing a dialling pause (pause after
access code)
Precondition: You have saved an access
¢
code ( page 61).
v
Open the main menu.
*#Q5#
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.;
2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the dis-
play.
62
.
§OK§
.
§OK§
.
§OK§
Temporarily switching to tone
dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need tone dialling for a con-
nection (e.g. to listen to the network mail-
box) you must switch to tone dialling for
the call.
Precondition: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.