Changing Ringers; Activating/Deactivating Led Signal; Resetting The Base To The Default Settings; Base Led Signal - Siemens Gigaset E500A User Manual

Changing ringers

u Volume:
Five volume levels (1–5; e.g.,
volume 3 = ˆ) and "Off"
°
(volume 0 =
u Melody:
List of pre-loaded ringer melo-
dies. The first three melodies are
the "classic" ringtones.
u Time control:
You can specify a time period
when you do not want the tele-
phone to signal external calls e.g.,
during the night.
¤ q Settings ¤
§Menu§
¤ q Audio/Visual Signals ¤
¤ q Base Audio Settings ¤
¤ q Ringer Volume / Ringtones
/ Time Control ¤
If Ringer Volume / Ringtones is
selected:
¤ q (Select volume/melody)
¤
§OK§
(³= melody selected)
If Time Control is selected, activate
and set time control:
q Activation
¤
§OK§
(³= activated)
q Settings ¤
§OK§
Starting Time: /Ending Time:
Enter each time as a 4-digit number
§OK§
and press .
‡).
§OK§
§OK§
§OK§
§OK§
Activating/deactivating
LED signal
¤ q Settings ¤
§Menu§
¤ q Audio/Visual Signals ¤
¤ q Base LED Signal
¤
§OK§
(³= on)
Resetting the base to the
default settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode is activated and Eco
Mode+ is deactivated
u The system PIN is not reset.
¤ q Settings ¤
§Menu§
¤ q System ¤
¤ q Reset Base ¤
Please note
The answering machine is ready
for use approx. 15 seconds after
the base has been connected or
reset.
Base settings
§OK§
§OK§
§OK§
§OK§
§OK§
63