Table of Contents
Advertisement
Call display
When you receive a call, the phone
number is shown in the display.
If the number of the caller is stored
in your directory, the display is
replaced by the corresponding
directory entry.
1234567890
Accept
Silence
The following is displayed in place of
the number:
u Extern. Call, if no number is trans-
mitted.
u Withheld, if the caller has with-
held Calling Line Identification.
u Unavailable, if the caller has not
arranged Calling Line Identifica-
tion.
Please note
The ringer can be switched off for
unknown calls (calls with Calling
Line Identification withheld)
(¢ page 60).
Notes on calling line
display (CLIP)
By default, the number of the caller
is shown in the display of your
Gigaset telephone. You do not have
to make any other settings on your
Gigaset telephone.
However, if the caller's number is
not displayed, this can be due to
the following:
u You have not ordered CLIP from
your network provider or
u Your telephone is connected via a
PABX or a router with an inte-
grated PABX (gateway) that does
not transmit all information.
Is your telephone connected via a
PABX/gateway?
You can establish this by checking
for an additional device connected
between your telephone and house
connection, e.g., a PABX, gateway
etc. In most cases, simply resetting
this device will remedy the situation:
¤ Briefly disconnect the mains plug
of your PABX. Re-insert the plug
and wait for the device to restart.
If the caller number is still not
displayed:
¤ Check the CLIP settings of your
PABX and activate this function if
necessary. In the user guide for
the device, search for the term
"CLIP" (or an alternative term such
as "calling line identification",
"phone number transmission",
"caller ID", etc.). If necessary, con-
tact the device manufacturer.
If this does not resolve the problem,
it is possible that your network pro-
vider does not provide the CLIP serv-
ice for this number.
Making calls
33
Advertisement
Table of Contents
