De-Registering Handsets; Locating A Handset ("Paging"); Making Internal Calls - Siemens Gigaset E490 User Manual

Using several handsets

De-registering handsets

You can de-register any other registered
handset from any registered Gigaset E49H
handset.
u
Open list of internal partici-
pants.
The handset you are currently
using is indicated by <.
s
Select the internal participant
you wish to deregister.
§Options§
Open menu.
De-reg. H/Set No.
Select and press
~
Enter the current system PIN
and press
§Yes§
Press the display key.

Locating a handset ("paging")

You can locate your handset using the base
station.
¤
Briefly press the registration/paging key
on the base station (page 1).
¤
All handsets will ring simultaneously
("paging"), even if the ringers are deacti-
vated.
Ending paging
¤
Briefly press the registration/paging key
on the base station or press the talk key
c on the handset.

Making internal calls

Internal calls to other handsets registered to
the same base station are free of charge.
46
§OK§
.
§OK§
.
Calling a specific handset
u
Initiate internal call.
~
Enter the number of the hand-
set.
Or:
u
Initiate internal call.
s
Select handset.
c
Press the talk key.
Calling all handsets ("group call")
u
Initiate internal call.
*
Press the star key. All handsets
are called.
Ending a call
a
Press the end call key.
Transferring a call to another
handset
You can transfer an external call to another
handset (connect).
u
Open the list of handsets.
The external participant hears
hold music if activated
¢
( page 54).
s
Select a handset or Call All and
§OK§
press
When the internal participant answers:
¤
If necessary announce the external call.
a
Press the end call key.
The external call is transferred to the other
handset.
If the internal participant does not answer or
the line is busy, press the display key
return to the external call.
When transferring a call you can also press
the end call key a before the internal par-
ticipant answers.
Then, if the internal participant does not
answer or the line is busy, the call will auto-
matically return to you (the display will show
Recall).
.
§End§
to