Siemens Gigaset E490 User Manual page 13

First battery charge and discharge
The correct charge status can only be displayed if the battery is first fully charged
and discharged.
Please note
u
After the first battery charge and discharge, you may place your handset in
the charging cradle after every call.
u
Always repeat the charging and discharging procedure if you remove the
battery from the handset and reinsert it.
u
The battery may heat up during charging. This is not dangerous.
u
After a time, the charge capacity of the battery will decrease for technical
reasons.
¤
Place the handset in the charging cradle for six
hours.
¤
6 h
First steps
Once the battery is fully
charged, remove the hand-
set from the charging cradle
and do not put it back again
until the battery is fully dis-
charged.
11