Locating A Handset ("Paging"); Changing The Base Station; Making Internal Calls - Siemens Gigaset S185 Operating Instructions Manual

Locating a handset ("paging")

You can locate your handset using the
base station.
¤
Press the registration/paging key ÷ on
the base station briefly.
¤
All handsets will ring at the same time
("paging"), even if the ringers are
switched off.
Ending paging
¤
Briefly press the registration/paging
key on the base station or press the talk
key c or the
Silence
handset.

Changing the base station

If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception
¢ ¢
v Ð
Handset
s
Select one of the registered
base stations or
press
§OK§

Making internal calls

Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
u
Initiate internal call.
~
Enter the number of the hand-
set.
Or:
u
Initiate internal call.
s
Select handset.
c
Press the talk key.
Calling all handsets ("group call")
u
Initiate internal call.
*
Press the star key. All handsets
are called.
display key on any
(Best Base).
¢
Select Base
and
Best Base
.
Ending a call
a
Press the end call key.
Transferring a call to another handset
You can transfer an external call to
another handset.
u
Open list of handsets.
The external caller hears the
hold melody if activated (see
page 39).
s
Select a handset or
press
§OK§
When the internal participant answers:
¤
If necessary announce the external call.
a
Press the end call key.
The external call is transferred to the other
handset.
If the internal participant does not answer
or is busy, press the display key
return to the external call.
When diverting a call you can also press
the end call key a before the internal
participant lifts the receiver.
Then, if the internal participant does not
answer or is busy, the call will automati-
cally return to you (the display will show
Recall).
Hold with simultaneous internal call
When you are speaking to an external
participant you can simultaneously call an
internal participant for consultation.
u
Open list of handsets.
The external caller hears the
hold melody if activated (see
page 39).
s
Select handset and press
Ending an inquiry call
Press the display key.
§End§
You are reconnected with the external
caller.
Using several handsets
and
Call All
.
, to
§End§
§OK§
31
.