Table of Contents
Advertisement
Closing the battery cover
¤
First align the notches on the side of
the battery cover with the clips on the
inside of the casing.
¤
Then close the cover, press on the top
so that it clicks into place.
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset just above
the display.
Press the belt clip onto the back of the
handset so that the protrusions on the belt
clip engage with the notches.
Opening the battery cover
¤
If fitted, remove belt clip.
¤
Insert your fingernail into the headset
socket notch and pull the battery cover
upwards.
Placing the handset in the base station
and registering
¤
To start the automatic registration of
your handset, please place the handset
in the base with the display facing
outwards.
First Steps
11
Advertisement
Table of Contents
