Resetting Fast Access On The Answering Machine To Network Voice Mail; Operating When On The Move (Remote Operation) - Siemens Gigaset S185 Operating Instructions Manual

¢ ¢
v Ð
Voice Mail
r
Select recording time.
Press the display key.
§Save§
Setting recording quality
Set the quality you require for your record-
ings. The options are: Standard, High,
Excellent. If the quality is higher the
max. recording time is reduced.
¢ ¢
v Ð
Voice Mail
r
Select the recording quality.
Press the display key.
§Save§
Changing language for voice prompt
and pre-recorded announcement
v55O2
Enter the digits.
1
Set English.
2
Set French.
I
Set Spanish.
Resetting fast access on the
answering machine to Network
Voice Mail
The integrated answering machine is fac-
tory-set for fast access. However if you
have set the network mailbox for fast
access (page 29) you can reset this set-
ting.
¢ ¢
v Ð
Voice Mail
¢
Answer Machine
Select and press
a
Press and hold (idle status).
After you have selected the network mail-
box or the answering machine, press and
hold key 1. You will be connected
directly.
The setting for fast access applies to all
handsets.
¢
Message Length
¢
Record Quality
¢
Set Key 1
/
Network Mailb.
.
§OK§
Operating the answering machine
Operating when on the move
(remote operation)
You can check or activate the answering
machine from any other telephone (hotel,
pay phone, etc).
Requirements:
u
You must set a system PIN to a 4-digit
number other than factory default of
0000 (page 38).
u
The phone you are using for remote
operation has tone dialing (DTMF),
such that you hear different tones
when you press the keys.
Calling the answering machine and
playing back messages
~
Dial your own number.
9 ~
While you listen to your
announcement, press the
key and enter the system PIN.
You will be informed whether any new
messages have been recorded. The mes-
sages are then played back. You can now
operate the answering machine via the
keypad or by voice prompts, page 28.
Operating the answering machine via the
keypad
The following keys are used for operation:
A
Go to the start of the previous
message.
B
Stop playback. Press 2 again to
resume.
3
Go to the next message.
:
Mark message as "new".
0
Delete current message.
Note:
After message playback, the call will be
terminated.
9
27