Sensor Frying System; Pans For The Sensor Frying System; Frying Settings; Setting The Sensor Frying System - Siemens ET8 Series Instruction Manual

Thickening food
Food, e.g. potatoes, are unevenly
cooked
No signal sounds

Sensor frying system

If you operate the hotplate with the sensor frying system, a
sensor regulates the temperature of the pan.
Advantages when frying
The hotplate only heats up when necessary. This saves energy.
Oil and fat do not overheat.
Notes
Never leave fat unattended while you are heating it.
■
Put the pan in the centre of the hotplate. Make sure that the
■
base of the pan has the correct diameter.
Do not place a lid on the pan, otherwise the regulator will not
■
work. You can use a splatter guard; it will not prevent the
regulator from working.
Only use fat that is suitable for frying. For butter, margarine,
■
olive oil or lard, select the min frying setting.

Frying settings

Frying Temperature
setting
high
max
medium ­ high
med
low - medium
low
low
min

Setting the sensor frying system

Select the appropriate frying setting from the table. Put the pan
on the hotplate.
The hob must be switched on.
Touch the S symbol. The
1.
possible frying settings appear in the display menu.
Within the next 10 seconds, select the desired frying setting
2.
on the settings range. The sensor frying system is activated.
The large dual-circuit hotplate is switched on automatically.
10
Bring the food to the boil at the recommended temperature. After the food has thickened,
leave it to stand at 90 °C.
Next time, use more water.
Always place a lid on the pot. Then the regulating function will work best.
Suitable for
e.g. potato fritters, roast potatoes and rare steaks.
e.g. thin food, such as escalope, frozen breaded products, strips of meat, vegetables
e.g. thick food, such as rissoles and sausages, fish
e.g. omelettes, food fried in butter, olive oil or margarine
' in the display lights up. The
PLQ ORZ PHG PD[
PLQ ORZ PHG PD[

Pans for the sensor frying system

System pans as optional accessories
You can also purchase a frying pan which is ideally suited to
frying using the sensor frying system from your specialist
electrical retailer or at www.siemens­eshop.com: HZ390230
Both availability and whether it is possible to order online differ
between countries.
The frying settings given below have been adjusted to the
system pans.
Note: The sensor frying system may also work with other pans.
Test the pans first with low frying settings, changing as
necessary. The pans may overheat on high frying settings.
The temperature symbol remains lit until the frying temperature
is reached. Then a signal sounds. The temperature symbol
goes out.
Add the fat and then the food to the pan.
3.
Turn as normal to prevent burning.
Switching off the sensor frying system
Set to 0 on the settings range.
ORZ
PLQ ORZ PHG PD[