Changing The Basic Settings; Cleaning And Care; Ceramic - Siemens ET8 Series Instruction Manual

Indicator Function
™... Automatic timer
- Decreased.
‚ ƒ
Basic setting.
„
... ­ Š Increased.
Automatic timer
™†
Switched off.
‹
- Cooking time, after which the hotplates switch off
‚ ŠŠ
™‡ Duration of the timer end signal
10 seconds.*
‚
ƒ n 30 seconds
1 minute.
„
Activation of the filament circuits
™ˆ
‹ Switched off.
‚ Switched on.
Last setting before the hotplate was switched off.*
ƒ
™Š Time for selecting the hotplate
‹ Unlimited: The last selected hotplate can always be adjusted without having to select it again.
Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
‚
be able to adjust it.
Reset to basic setting
™‹
Switched off.
‹
Switched on.
‚
*Basic setting

Changing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch the
2.
seconds.
™‚ appears on the left-hand display and
display.

Cleaning and care

The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
14
symbol for 4
0
‹ on the right-hand
Touch the symbol repeatedly until the desired symbol
0
3.
appears on the left-hand display.
Set the desired value on the settings range.
4.
Touch the symbol for 4 seconds.
0
5.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
Use only cleaning agents which are suitable for ceramic. Follow
the cleaning instructions on the packaging.
Never use:
Undiluted washing-up liquid
■
Detergent intended for dishwashers
■
Scouring agents
■
Harsh cleaning agents such as oven spray or stain remover
■
Abrasive sponges
■