Sharp R-8740M Operation Manual page 17

R-8740M O/M 5/15/01
Website: http://www.sharp.co.uk/support
9. Press the
MEMORY key.
Note:
To change memory banks consecutively, press the desired NUMBER key prior to pressing the STOP key.
After selecting the NUMBER key, follow the example on page 14.
2b. TO CHANGE THE REDUCE FACTORS
The reduce factor is preset at 0.9.
This can be changed for each memory bank individually.
Example: To reduce the factor in memory 1 to 0.8.
1. Press the MEMORY key and hold for 2
seconds until the signal sounds twice.
(MEMORY indicator will come on.)
4. Set the reduce factor.
x1
Notes:
• The reduce factor can be set from 0.00 to 0.99.
• To change the reduce factor consecutively, press the desired NUMBER key prior to pressing the STOP
key. After selecting the NUMBER key, follow the example above.
12:42 PM Page 15
10. Press the STOP key to release
the memory setting mode.
x1
x1
for 2 seconds
5. Press the
MEMORY key.
x1
Help Line: 08705 274277 (office hours)
CONVENIENT FUNCTIONS
x1
3. Select the MEMORY number.
2. Press the TIME
Press the NUMBER 1 key.
REDUCE key.
x1
6. Press the STOP key to release
the memory setting mode.
x1
15
x1
x1