Installation - Sharp R-61FBST Operation Manual With Cookbook

R-61+62FBST English 23/07/2003
INSTALLING THE APPLIANCE
1. Remove all packaging and check carefully for
any signs of damage.
2. Fit the appliance into the kitchen cupboard
slowly, and without force, until the front frame of
the oven seals against the front opening of the
cupboard.
3. Ensure the appliance is
stable and not leaning.
Ensure that a 5mm gap is
kept between the
cupboard door above
and the top of the frame
(see diagram).
SAFE USE OF THE APPLIANCE
• This appliance has been tested and approved for use near domestic gas, electric and induction hobs only.
• Sufficient space between hob and microwave should be allowed to prevent overheating of microwave
oven, surrounding cupboard and accessories.
• Do not operate the hob without pans
when the microwave oven is operating.
• The cupboard must be a minimum of
500 mm (A) above the worktop and
must not be installed directly above a
hob or other kitchen appliance e.g.
conventional oven or refrigerator.
• Care should be taken when attending to
the microwave oven while the hob is on.
• The front of the oven can be cleaned
with mild soap and water.
Do not use commercial oven cleaners,
abrasive harsh cleaners, or those that
contain Sodium Hydroxide.
12:13 Page 7
4. Fix the oven in position with
the screws provided.
The fixing points are
located on the top and
bottom corners of the oven
(see diagram, item 10, on
page 2).
5. It is important to ensure that the installation of
5 mm
this product conforms to the instructions in this
operation manual and the hob manufacturer's
installation instructions.
7

INSTALLATION

A
A