BEFORE OPERATING
Getting Started
Step
Procedure
Plug the oven into a power point.
Ensure the oven door is closed.
1
Press the STOP/CLEAR pad so that the
oven beeps.
2
Clock Setting
* To enter the present time of day 11:34 (AM or PM).
Step
Procedure
Press the TIMER/CLOCK pad.
1
Enter the correct time of day by pressing
the numbers in sequence.
2
Press the TIMER/CLOCK pad again.
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45),
display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
The clock of the oven works based on the frequency of power source. So it may gain or lose in some area
where the frequency varies. It is recommended that you should adjust the time occasionaly.
If you wish to know the time of day during the cooking or timer mode, press the TIMER/CLOCK pad. As long
as your finger is pressing the TIMER/CLOCK pad, the time of day will be displayed.
Stop/Clear
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
Pad Order
Pad Order
6
Display
Flashing eights
Only the dots will remain.
Display
The dots (:) will flash on and
off.
will appear in the