Sharp XL-MP9H Operation Manual page 35

Micro component system
Hide thumbs Also See for XL-MP9H:
Table of Contents

Advertisement

! To recall stations in memory
To specify programme types and select stations (PTY search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 21 - 22) from the sta-
tions in memory.
1
Press the TUNER (BAND) button to select the FM.
2
Press the SHIFT button and press the PTY.TI button.
"PTY TI" will flash for about 6 seconds.
3
Within 6 seconds, press the PRESET (
lect the programme type.
Each time the button is pressed, the programme type will ap-
pear. If the button is held down for more than 0.5 seconds, the
programme type will appear continuously.
4
Whilst the selected programme type is flashing (within 4
seconds), press the SHIFT button and then the PTY.TI but-
ton.
After the selected programme type has been lit for 2 seconds,
"SEARCH" will appear, and the search operation will start.
Notes:
" If the display has stopped flashing, start again from step 2. If the
unit finds a desired programme type, the corresponding channel
number will flash for about 4 seconds, and then the station name
will flash for 7 seconds, which will remain lit.
" If you want to listen to another station of the same programme
type, press the SHIFT button and then the PTY.TI button whilst
the channel number or station name is flashing. The unit will look
for the next station.
" If no station can be found, "NOTFOUND" will appear for 4 sec-
onds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, "TP" will appear.
(This does not mean that you can listen to the traffic information at
that time.)
or
) button to se-
When the traffic information is broadcast, "TA" will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2,
etc.) from the stations stored in memory.
Before starting this operation, you must store one or more station
names in memory.
1 Press the TUNER (BAND) button to select the FM band.
2 Press the PRESET (
05/5/23
or
) button to select a desired station.
XL-MP9H(H)E3.fm
TINSZA058SJZZ
XL-MP9H
ENGLISH
8
E-24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents