Specifications - Sharp SD-SH111 Operation Manual

Specifications

SD-SH111
ENGLISH
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Power source AC 120 V, 60 Hz
Power consumption 66 W
Dimensions Width: 17-3/4" (450 mm)
Height: 6" (152 mm)
Depth: 6" (152 mm)
Weight 10.8 lbs. (4.9 kg)
Terminals Front speakers, Center speaker, Surround speakers and
Subwoofer: 4 ohms minimum
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Monitor output: S-video/video
Subwoofer Pre Out: 10 kohms
Digital output: Optical
S-video output (AV 2): S-terminal
Video output (AV 2): RCA type
Audio output (AV 2): RCA type (L/R)
Audio input [AV 1 (TV)]: RCA type
S-video input (AV 2, 3): S-terminal
Video input (AV 2, 3): RCA type
Audio input (AV 2, 3): RCA type (L/R)
Digital input (AV 3): Optical
Component video output: RCA type
Amplifier
Amplification system 128fs 1-bit switching (Remarks: fs = 44.1 kHz)
Power output (FTC) 22 watts minimum RMS per channel into 4 ohms from 20
Hz to 20 kHz, 2 % total harmonic distortion
Rated power output Front: 25 W + 25 W, Center: 25 W,
Surround: 25 W + 25 W (4 ohms at 1 kHz)
Subwoofer: 25 W (4 ohms at 100 Hz)
A/D noise shaping 7th-order
E-67
(delta - sigma) modulation
DVD/CD player
Signal system NTSC
Supported disc types DVD (Region number 1, ALL), audio CD, CD-R, CD-RW
Video signal Horizontal resolution: 500 lines
S/N ratio: 60 dB
Audio signals Frequency characteristics:
Linear PCM DVD: 4 Hz to 22 kHz (48 kHz sampling)/
Linear PCM DVD: 4 Hz to 44 kHz (96 kHz sampling)
CD: 4 Hz to 20 kHz
S/N ratio: 96 dB 1 kHz (CD)
Dynamic range: 96 dB (Linear PCM DVD)
Dynamic range: 96 dB (CD)
Total harmonic distortion ratio: 0.006 % maximum
Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
02/11/20 SD-SH111(U)E7.fm