Listening To The Memorized Station - Sharp SD-SH111 Operation Manual

Listening to the memorized station

Memorizing a station
(Remote control operation)
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
1
Perform steps 1 - 3 in "Listening to the radio" on page 27.
2
Press the ENTER button to enter the preset tuning saving mode.
3
Within 5 seconds, press the TUNER PRESET ( or ) button to se-
lect the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 5 seconds, press the ENTER button to store that station in
memory.
If the "MEMORY" and preset number indicators go out before the station is mem-
orized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorized will
be erased.
Note:
The backup function protects the memorized stations for a few hours should there be
a power failure or the AC power cord disconnection.
To recall a memorized station
(Remote control operation)
Press the TUNER PRESET ( or ) button to select the desired sta-
tion.
Preset channel
To erase all the contents of the preset
memory
(Remote control operation)
1 Press the TUNER (BAND) button.
2 Hold the CLEAR button down for 3 seconds
or more.
3 While "CLEAR" is displayed, press the EN-
TER button.
02/11/20 SD-SH111(U)E3.fm
SD-SH111
ENGLISH
Frequency and frequency band
E-28
7