To Resume Playback After Stopping (Sequential Playback) - Sharp SD-SH111 Operation Manual

To select and play the desired chapter:
1
During playback, press the DIRECT button
twice.
2
Within 10 seconds, enter the chapter number us-
ing the direct buttons (0 - 9), and then press the
ENT button.
If you enter the wrong number, press the CLEAR button and then reenter.
You can also select the chapter number by pressing the
Notes:
Some DVDs may not display the chapter number.
Playback does not start if a chapter number higher than that on the disc is
selected.
To play by specifying time:
1
During playback, press the DIRECT button 3
times.
2
Within 10 seconds, specify the time with the di-
rect buttons (0 - 9) and then press the ENT but-
ton.
To specify 1 hour 23 minutes and 40 seconds, enter "012340".
If you enter the wrong number, press the CLEAR button and then reenter.
If the time is entered with the or buttons while setting the time, press the
or buttons to switch between hours, minutes, and seconds.
Note:
Playback does not start if you specify the time exceeding the actual recording time.
You can resume playback from the point that the playback is stopped.
[Front]
2 / 5
/ 3 0
0 1 : 3 0 0 8 :
2 / 5
1 0 / 3 0
0 1 : 3 0 0 8 :
or button.
To resume playback after stopping
(sequential playback)
2 / 5
1 0 / 3 0
: :
1
While the disc is playing, press the DVD/CD
The system stores the point you stopped.
2 / 5
1 0 / 3 0
2
0 1 : 2 3 4 0 : To restart play, press the DVD/CD
Play resumes from the point you stopped.
3
To cancel this operation, press the DVD/CD
Notes:
The sequential playback feature is disabled on some discs.
Depending on the disc, playback may resume from slightly before the stopped
position.
To start playback from the beginning, cancel this operation.
Opening the disc compartment will cancel the sequential playback operation.
button.
button.
button twice.
02/11/20 SD-SH111(U)E4.fm
SD-SH111
ENGLISH
7
E-34